- Brand : Tripp Lite
- Product name : B127F-1A1-MM-HH HDMI over Fiber Extender Kit, Transmitter/Receiver, 4K 60 Hz, 4:4:4, RS-232, IR, Multimode LC, 985 ft. (300 m), TAA
- Product code : B127F-1A1-MM-HH
- GTIN (EAN/UPC) : 0037332239143
- Category : AV Extenders
- Data-sheet quality : created/standardized by Icecat
- Product views : 76911
- Info modified on : 11 Aug 2024 07:49:29
- Product Brochure/Datasheet (0.1 MB)
-
Bullet Points Tripp Lite B127F-1A1-MM-HH HDMI over Fiber Extender Kit, Transmitter/Receiver, 4K 60 Hz, 4:4:4, RS-232, IR, Multimode LC, 985 ft. (300 m), TAA
:
- - Supports UHD resolutions up to 4K @ 60 Hz (4:4:4) for crystal-clear video
- - Extend touch screen ability of Interactive Flat Panel Displays
- - Supports uncompressed DTS-HD, Dolby AC-3 and 7.1-channel digital audio
- - Supports High Dynamic Range (HDR) for richer contrast and expanded color accuracy
- - Transmitter's local HDMI port allows you to see the image being displayed 125 ft. away
- - Plug-and-play operation with no software required for easy, immediate installation
- - Supports data transfer rates up to 18 Gbps
- Warranty: : 1-year limited
-
Long product name Tripp Lite B127F-1A1-MM-HH HDMI over Fiber Extender Kit, Transmitter/Receiver, 4K 60 Hz, 4:4:4, RS-232, IR, Multimode LC, 985 ft. (300 m), TAA
:
HDMI over Fiber Extender Kit, Transmitter/Receiver, 4K 60 Hz, 4:4:4, RS-232, IR, Multimode LC, 985 ft. (300 m), TAA
-
Tripp Lite B127F-1A1-MM-HH HDMI over Fiber Extender Kit, Transmitter/Receiver, 4K 60 Hz, 4:4:4, RS-232, IR, Multimode LC, 985 ft. (300 m), TAA
:
Extends HDMI Audio/Video Signals up to 300 m for Digital Signage
This complete transmitter and receiver system is recommended for video presentations in digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127F-1A1-MM-HH extends 4K video and stereo audio signals from an HDMI source device to an HDMI monitor up to 985 feet (300 meters) away via user-supplied duplex multimode LC fiber cabling.
Transmits Crystal-Clear 4K HDMI Video with Multi-Channel Audio, HDR and 4:4:4 Color
The B127F-1A1-MM-HH supports Ultra HD video resolutions up to 4K x 2K (3840 x 2160) at 60 Hz, as specified in HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. Built-in equalization automatically fine-tunes the image quality at the remote display with no time-consuming manual fiddling needed. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream iTunes and Netflix content with no complications. This adapter supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor.
DIP Switches Extend Your Choice of USB, IR or RS-232 Signals
The DIP switches on both the transmitter and receiver can be adjusted to let you choose from the USB 1.1, bi-directional IR and RS-232 functions. Only one function can be extended at a time.
Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing the units on walls, poles or 19-inch racks. Connect the transmitter to the source and the receiver to the display with HDMI cables (such as P569-Series). Then, connect a duplex multimode LC fiber cable (N820-Series) to the built-in 10G transceivers on the two units.
Local HDMI Port Allows Connection of an Optional Display
Connect an optional display to the transmitter's local HDMI output to see the image connected to the receiver up to 985 feet away. The local port allows connection of displays with lower resolutions, such as 720p and 1080p, without affecting the 4K 60 Hz signal transmission to the receiver.
TAA-Compliant for GSA Schedule Purchases
The B127F-1A1-MM-HH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts. -
Short summary description Tripp Lite B127F-1A1-MM-HH HDMI over Fiber Extender Kit, Transmitter/Receiver, 4K 60 Hz, 4:4:4, RS-232, IR, Multimode LC, 985 ft. (300 m), TAA
:
Tripp Lite B127F-1A1-MM-HH HDMI over Fiber Extender Kit, Transmitter/Receiver, 4K 60 Hz, 4:4:4, RS-232, IR, Multimode LC, 985 ft. (300 m), TAA, 3840 x 2160 pixels, AV transmitter & receiver, 300.2 m, Wired, Black, HDCP
-
Long summary description Tripp Lite B127F-1A1-MM-HH HDMI over Fiber Extender Kit, Transmitter/Receiver, 4K 60 Hz, 4:4:4, RS-232, IR, Multimode LC, 985 ft. (300 m), TAA
:
Tripp Lite B127F-1A1-MM-HH HDMI over Fiber Extender Kit, Transmitter/Receiver, 4K 60 Hz, 4:4:4, RS-232, IR, Multimode LC, 985 ft. (300 m), TAA. Type: AV transmitter & receiver, Maximum resolution: 3840 x 2160 pixels, Cable types supported: Fiber, HDMI. Connectivity technology: Wired, Fiber optic connector: LC, USB connector type: Micro-USB B, USB Type-A. AC input voltage: 100 - 240 V, AC input frequency: 50 - 60 Hz, Operating voltage: 5 V. Package width: 343.9 mm, Package depth: 150.1 mm, Package height: 83.1 mm. Cables included: AC, Included power plug types: AU, EU, NA, UK
Features | |
---|---|
Type | AV transmitter & receiver |
Maximum resolution | 3840 x 2160 pixels |
Cable types supported | Fiber, HDMI |
Maximum transfer distance | 300.2 m |
Maximum refresh rate | 60 Hz |
Fiber optic wavelengths supported | 850 nm |
Fiber mode structure | Multi-mode |
Extended display identification data (EDID) | |
LED indicators | |
HDCP | |
Material | Metal |
Rack mounting | |
Plug and Play | |
Wavelengths supported | 850 nm |
HDCP version | 2.2 |
Product colour | Black |
Certification | CE, FCC, REACH |
Ports & interfaces | |
---|---|
Connectivity technology | Wired |
HDMI in | 2 |
Number of HDMI outputs | 1 |
Fiber optic connector | LC |
USB ports quantity | 3 |
USB connector type | Micro-USB B, USB Type-A |
3.5 mm (1/8-inch) in | |
3.5 mm (1/8-inch) out |
Power | |
---|---|
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Operating voltage | 5 V |
Input current | 0.35 A |
Power | |
---|---|
Output current | 2 A |
External power adapter |
Operational conditions | |
---|---|
Operating temperature (T-T) | 0 - 40 °C |
Storage temperature (T-T) | -15 - 50 °C |
Operating relative humidity (H-H) | 0 - 85% |
Storage relative humidity (H-H) | 0 - 85% |
Packaging data | |
---|---|
Package width | 343.9 mm |
Package depth | 150.1 mm |
Package height | 83.1 mm |
Package weight | 1.39 kg |
Packaging content | |
---|---|
AC adapter included | |
Cables included | AC |
Included power plug types | AU, EU, NA, UK |
Manual | |
Mounting brackets included |
Technical details | |
---|---|
Country of origin | Taiwan |
Compliance certificates | RoHS |
Logistics data | |
---|---|
Master (outer) case width | 438.9 mm |
Master (outer) case length | 363 mm |
Master (outer) case height | 324.1 mm |
Master (outer) case gross weight | 14.3 kg |
Products per master (outer) case | 10 pc(s) |
Master (outer) case GTIN (EAN/UPC) | 10037332239140 |
Country | Distributor |
---|---|
|
5 distributor(s) |
|
5 distributor(s) |
|
1 distributor(s) |
|
1 distributor(s) |
|
1 distributor(s) |
|
1 distributor(s) |